|
Action will be skipped (Option)
|
The action will be skipped in the calculation process if the option is selected. |
|
Command
|
This is automatically assigned from the previous selection - it can not be edited in this pad. |
|
Load case name
|
Name of the load case, for which the principal stresses will be calculated. |
|
Princ||Mises||Shear||Shear-Qy||Shear-Qz
|
There is necessary to choose the type of principal stresses to be calculated. | Setting | Description |
|---|
|
Princ
|
The principal stresses will be calculated |
|
Mises
|
The equivalent stresses according Von Mises rule will be calculated |
|
Shear
|
The mean shear stress according Tresca rule will be calculated |
|
Shear-Qy
|
The shear stress in global Y direction, caused by Qy, Qz and Mx (sum of them) will be calculated |
|
Shear-Qz
|
The shear stress in global Z direction, caused by Qy, Qz and Mx (sum of them) will be calculated |
|
|
(Stress limit)
|
Not necessary input. If the stress limit is input, only stress values for elements, which overstep the limit, will be print out (absolute limit). |
|
List File
|
Name of list file, where the principal tensile stresses will be stored.
- -If the default '*' is accepted, the name of the list file is set automatically prch0001.lst if the load case name is 1
- -If there is no input, no list file will be created!
|
|
Delta-T
|
Duration of the Action (not applicable for this action) |
|
Description
|
Descriptive text for the selected Action (max. 80 characters) |
